PLACE AN ORDER |
StangerSite © 2008 All pictures, diagrams, text and illustrations are the property of StangersSite and may not be copied or reproduced without the express written permission of the Webmaster |
Ford Truck Control Valve Rebuild Kits |
Garrison-style Control Valve |
All seals and o'rings to recondition the Garrison truck valve |
plus $4.95 Priority Mail shipping |
$ |
. |
95 |
Although most Ford Light-Duty trucks came with an integral-style power steering system,
the F-250 4x4 trucks (sometimes known as "Highboys") came with a hydraulically
assisted linkage style system. Early models generally had the Garrison-style
setup and later trucks used the Bendix-style system. |
NOT AVAILABLE AT THIS TIME |
Bendix-style Control Valve |
• All new seals and o'rings for the Bendix truck valve • All new Ball Stud, Ball Stud Seats and Ball Stud Rubber Boot & Clamp • Comes with complete set of illustrated instructions. Eight pages written by a professional rebuilder with the home mechanic in mind. More thorough than even a Ford shop manual. |
CONTROL VALVE & BALL STUD REBUILD KIT |
CONTROL VALVE RE-SEAL KIT |
• Two new Spool Seals and Bushings • Two new Reaction Valve Plug O'rings • One new Body Plug O'ring • Comes with complete set of illustrated instructions. Eight pages written by a professional rebuilder with the home mechanic in mind.More thorough than even a Ford shop manual. |
Used on 1973 - 1977 F100/F150 4WD 1973 - 1974 F250 4WD before serial # T80,001 |
Used on 1974 - 1977 F250 4WD after serial # T80,001 |
CALL FOR AVAILABILITY |
$ |
99. |
95 |
plus $4.95 Priority Mail shipping |
$ |
24. |
95 |
plus $4.95 Priority Mail shipping |